Props & Additions
Flaming Torch can be used free standing or hand-held with removable stand. Small fan and fabric simulate a real flame. Requires 4 AA batteries, not included. 12"H
PLEASE READ INSTRUCTIONS BELOW BEFORE CALLING REGARDING OPERATION.
Qty in Basket:
Product Code: 8360
| FLAMING TORCH INSTRUCTIONS:
1. Remove torch from box.
2. Unscrew bottom battery compartment.
3. Place 2 AA batteries inside compartment with positive side facing up, toward the flame.
4. Screw battery compartment to middle section of the torch.
5. Be sure the arrow in the middle section is facing up toward flame.
6. Unscrew middle section from top section (the section with flame).
7. Insert 2 AA batteries into top section with negative end facing up toward flame.
8. Screw middle section back on top section.
9. Be sure the arrow in the middle section is pointing toward the flame.
10. Flip switch just below the flame so that it is in the ON position.
If either the flame or light do not work tighten the top and bottom portions of Torch.
Check that the arrow in the middle section is pointing toward the flame and fan.
If Arrow is pointing down, remove middle section and make sure the metal ring is not left
behind inside of middle section. Reassemble.